Operating tips, Climate controls – FORD 2006 Five Hundred v.3 User Manual
Page 41
6. Fan speed adjustment: Controls the volume of air circulated in the
vehicle.
Operating tips
• To reduce fog build up on the windshield during humid weather, place
the air flow selector in the
position.
• To reduce humidity build up inside the vehicle: do not drive with the
airflow selector in the O (OFF) or with recirculated air engaged.
• Do not put objects under the front seats that will interfere with the
airflow to the back seats.
• Remove any snow, ice or leaves from the air intake area at the base of
the windshield.
• For maximum cooling performance (MAX A/C):
In the MAX A/C mode:
• Move the temperature control selector to the coldest setting.
• Set the fan to the highest speed initially, then adjust to maintain
passenger comfort.
In the
and
modes:
• Move the temperature control selector to the coldest setting.
• Select A/C and recirculated air
. Use
with A/C to provide
colder airflow.
• Set the fan to the highest speed initially, then adjust to maintain
passenger comfort.
In extremely cold temperatures, to maximize overall heater performance
it is suggested to not operate the auxiliary system (if so equipped) until
the engine temperature gauge crosses into the normal operating range.
To aid in side window defogging/demisting in cold weather:
1. Select
.
2. Select A/C.
3. Set the temperature control to full heat.
4. Set the fan speed to the highest setting.
5. Direct the outer instrument panel vents towards the side windows.
Do not place objects on top of the instrument panel as these
objects may become projectiles in a collision or sudden stop.
2006 Five Hundred (500)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
41