beautypg.com

How fail-safe cooling works, When fail-safe mode is activated, Maintenance and specifications – FORD 2006 F-550 v.1 User Manual

Page 265

background image

What you should know about fail-safe cooling (if equipped)

If the engine coolant supply is depleted, this feature allows the vehicle to
be driven temporarily before incremental component damage is incurred.
The “fail-safe” distance depends on ambient temperatures, vehicle load
and terrain.

How fail-safe cooling works

If the engine begins to overheat:
• The engine coolant temperature

gauge will move to the red (hot)
area.

• The message center will indicate

the engine is overheating.

• The Service engine soon

indicator light will illuminate.

If the engine reaches a preset over-temperature condition, the engine
will automatically switch to alternating cylinder operation. Each disabled
cylinder acts as an air pump and cools the engine.

When this occurs the vehicle will still operate. However:
• The engine power will be limited.
• The air conditioning system will be disabled.
Continued operation will increase the engine temperature and the engine
will completely shut down, causing steering and braking effort to increase.

Once the engine temperature cools, the engine can be re-started. Take
your vehicle to a service facility as soon as possible to minimize engine
damage.

When fail-safe mode is activated

You have limited engine power when in the fail-safe mode, so drive the
vehicle with caution. The vehicle will not be able to maintain high-speed
operation and the engine will run rough. Remember that the engine is
capable of completely shutting down automatically to prevent engine
damage, therefore:

1. Pull off the road as soon as safely possible and turn off the engine.

2. Arrange for the vehicle to be taken to a service facility.

3. If this is not possible, wait a short period for the engine to cool.

4. Check the coolant level and replenish if low.

2006 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA
(fus)

Maintenance and Specifications

265

This manual is related to the following products: