Replacing high-mount brake lamp bulbs, Replacing license plate lamp bulbs, Lights – FORD 2007 Mustang User Manual

Page 47

Replacing high-mount brake lamp bulbs

1. Make sure the headlamp switch is in the OFF position and then open
the trunk.

2. Inside trunk, pull the trim panel
straight off of the underside of the
trunk lid.

3. Locate the lighting assembly and
push the release tab to access the
bulb socket.

4. Carefully pull the bulb straight
out of socket.

Install the new bulb in reverse
order.

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is
in the OFF position, then remove
the two screws and the license plate
lamp assembly.

2. Remove bulb socket by turning
counterclockwise.

3. Carefully pull the bulb out from
the socket.

Install new bulb(s) in reverse order.

2007 05+ Mustang (197)
Owners Guide (post-2002-fmt)
USA (fus)

Lights