Operating tips, Climate controls – FORD 2008 Mustang v.2 User Manual
Page 45
4.
Passenger heated seat: Press to activate or deactivate the
passenger side heated seat. The passenger heated seat will turn off
automatically after 10 minutes of use.
5.
R
Rear defroster: Press to activate/deactivate the rear window
defroster. Refer to Rear window defroster later in this section for more
information.
6.
Driver heated seat: Press to activate or deactivate the driver
side heated seat. The driver heated seat will turn off automatically after
10 minutes of use.
7. A/C: Press to activate/deactivate air conditioning. Use with
recirculated air to improve cooling performance. Engages automatically
in MAX A/C,
(defrost) and
(floor/defrost).
8. Fan speed adjustment: Controls the volume of air circulated in the
vehicle.
Operating tips
• To reduce fog build up on the windshield during humid weather, place
the air flow selector in the
(defrost) position.
• To reduce humidity build up inside the vehicle, do not drive with the
airflow selector in the O (OFF) position or with recirculated air
engaged.
• Do not put objects under the front seats that will interfere with the
airflow to the back seats.
• Remove any snow, ice or leaves from the air intake area at the base of
the windshield.
• To improve the A/C cool down, drive with the windows slightly open
for 2-3 minutes after start up or until the vehicle has been “aired out.”
For maximum cooling performance in MAX A/C mode:
1. Move temperature control to the coolest setting.
2. Set the fan to the highest speed initially, then adjust to maintain
comfort.
2008 05+ Mustang (197)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
45