beautypg.com

Driving, Starting, Positions of the ignition – FORD 2008 E-450 v.2 User Manual

Page 162: Preparing to start your vehicle

background image

STARTING

Positions of the ignition

1. ACCESSORY, allows the electrical
accessories such as the radio to
operate while the engine is not
running.

2. LOCK, locks the automatic
transmission gearshift lever and
allows key removal.

3. OFF, shuts off the engine and all
accessories without locking the
steering wheel.

4. ON, all electrical circuits operational. Warning lights illuminated. Key
position when driving.

5. START, cranks the engine. Release the key as soon as the engine
starts.

Preparing to start your vehicle

Engine starting is controlled by the powertrain control system.

This system meets all Canadian Interference-Causing Equipment
standard requirements regulating the impulse electrical field strength of
radio noise.

When starting a fuel-injected engine, don’t press the accelerator before
or during starting. Only use the accelerator when you have difficulty
starting the engine. For more information on starting the vehicle, refer to
Starting the engine in this chapter.

Extended idling at high engine speeds can produce very high
temperatures in the engine and exhaust system, creating the risk

of fire or other damage.

Do not park, idle, or drive your vehicle in dry grass or other dry
ground cover. The emission system heats up the engine

compartment and exhaust system, which can start a fire.

3

1

2

5

4

2008 Econoline (eco)
Owners Guide (post-2002-fmt)
USA
(fus)

Driving

162

This manual is related to the following products: