beautypg.com

Engine coolant, Checking engine coolant, Maintenance and specifications – FORD 2009 F-550 v.3 User Manual

Page 377

background image

• Always dispose of automotive

batteries in a responsible manner.
Follow your local authorized
standards for disposal. Call your
local authorized recycling center
to find out more about recycling
automotive batteries.

ENGINE COOLANT

Checking engine coolant

The concentration and level of engine coolant should be checked at the
intervals listed in scheduled maintenance information. The coolant
concentration should be maintained at 50/50 coolant and distilled water,
which equates to a freeze point of -34°F (-36°C). Coolant concentration
testing is possible with a hydrometer or antifreeze tester. The level of
coolant should be maintained at the “FULL COLD” level or within the
“COLD FILL RANGE” in the coolant reservoir. If the level falls below, add
coolant per the instructions in the Adding engine coolant section.

Your vehicle was factory-filled with a 50/50 engine coolant and water
concentration. If the concentration of coolant falls below 40% or above
60%, the engine parts could become damaged or not work properly. A
50/50 mixture of coolant and water provides the following:
Freeze protection down to -34°F (-36°C).
Boiling protection up to 265°F (129°C).
Protection against rust and other forms of corrosion.
Proper function of calibrated gauges.

L

E

A

D

RETURN

RECYCLE

2009 F-250/350/450/550 (f23)
Owners Guide, 3rd Printing
USA
(fus)

Maintenance and Specifications

377

This manual is related to the following products: