FORD 2010 Transit Connect v.1 - Manual (Page 19)

Information display
1. Distance to empty / clock:
Registers the approximate distance
the vehicle can travel before
refuelling is necessary. Clock shows
the current set time.
Switching the display between
“clock” and “distance to
empty”:
• Vehicles with “clock” displayed
normally: Press the Select button
(4) to switch to the “distance to
empty” display.
• Vehicles with “distance to empty”
displayed normally: Press the
Select button (4) to switch to the
“clock” display.
Setting the clock:
Vehicles with AM/FM radio:
Press the Select button (4) until
the time flashes in the display. Press the Select button (4) to set the
time.
Vehicles with AM/FM radio / CD player: Use the radio to set the
time. See Setting the clock in the Entertainment chapter.
2. Trip odometer: Registers the distance of individual journeys. Press
the reset button (5) until the trip odometer resets.
3. Odometer: Registers the miles (kilometers) of the vehicle.
4. Select button: Press to switch between clock and distance to empty.
Also used to set the clock for vehicles equipped with AM/FM radio.
5. Reset button: Press until the trip odometer resets.
Note: The information display will remain on for several minutes after
you switch off the ignition.
If SHON or SHIP ON is displayed, the vehicle shipping mode is switched
on. Have your dealer switch off the vehicle shipping mode.
Instrument Cluster
19
2010 Transit Connect (tst)
Owners Guide (own2002), 1st Printing
USA (fus)