Steering, Driving – FORD 2010 Focus v.2 User Manual
Page 184

Switching Off Traction Control
If the vehicle is stuck in snow, mud or sand, and seems to lose engine
power, switching off the TCS feature of the AdvanceTrac
system may
be beneficial because the wheels are allowed to spin. This will restore
full engine power and will enhance momentum through the obstacle. To
switch off the TCS press the AdvanceTrac
button. Full features of the
AdvanceTrac
system can be restored by pressing the AdvanceTrac
button again or by turning off and restarting the engine.
If you switch off the TCS, the “sliding car” icon
will illuminate
steadily. Pressing the AdvanceTrac
button again will turn off the lighted
button, “sliding car” icon
.
In R (Reverse), ABS and the engine traction control and brake traction
control features will continue to function; however, ESC is disabled.
AdvanceTrac
Features
Button functions
“Sliding car” icon
ESC
TCS
Default at start-up
Illuminated during
bulb check
Enabled
Enabled
Button pressed
momentarily
Illuminated solid
Enabled
Disabled
Button pressed
again after
deactivation
Not illuminated
Enabled
Enabled
STEERING
To help prevent damage to the power steering system:
• Never hold the steering wheel at its furthest turning points (until it
stops) for more than a few seconds when the engine is running.
• Do not operate the vehicle with a low power steering fluid level
(below the MIN mark on the reservoir).
• Some noise is normal during operation. If the noise is excessive, check
for a low power steering fluid level before seeking service by your
authorized dealer.
• Heavy or uneven steering efforts may be caused by a low power
steering fluid level. Check for a low power steering fluid level before
seeking service by your authorized dealer.
• Do not fill the power steering fluid reservoir above the MAX mark on
the reservoir.
If the power steering system breaks down (or if the engine is turned
off), you can steer the vehicle manually, but it takes more effort.
Driving
184
2010 Focus (foc)
Owners Guide, 2nd Printing
USA (fus)