FORD 2010 Escape Hybrid v.2 - Manual (Page 332)

Multi-point Inspection
In order to keep your vehicle running right, it is important that you have
the systems on your vehicle checked regularly. This can help identify any
potential issue before there are any problems. Ford Motor Company
suggests the following multi-point inspection to be performed at every
scheduled maintenance as the way to ensure your vehicle keeps running
right.
Maximum Oil Change Interval
❑ 12 months, 10,000 miles (16,000 km) or 200 hours of engine operation.
Engine Coolant Change Interval
❑
6 years or 100,000 miles (160,000 km) - change coolant (whichever comes first). Refer to Maintenance product specifica-
tions and capacities in the Maintenance and Specifications chapter for the proper coolant type.
❑
After initial change - change coolant every 3 years or 50,000 miles (80,000 km).
Check every month
❑ Check function of all interior and exterior lights
❑ Check tires for wear and correct air pressure, including spare tire
❑
Check windshield washer fluid level
❑ Check engine oil level
Check every six months
❑
Check lap/shoulder belts and seat latches for wear and function
❑
Check that externally mounted spare tire is properly stowed (tight)
❑ Check parking brake for proper operation
❑
Check safety warning lamps (brake, ABS, air bag, safety belt) for operation
❑ Check cooling system fluid level and coolant strength (engine and motor/electronics)
❑ Check low voltage (underhood) battery connections and clean if necessary
❑ Check washer spray, wiper operation and clean all wiper blades (replace as necessary)
❑ Check and lubricate all hinges, latches and outside locks. Inspect for correct operation
❑ Check and lubricate door rubber weatherstrips. Inspect for excessive wear
❑ Check and clean body and door drain holes. Inspect for clogs and obstructions
Scheduled Maintenance Guide
332
2010 Escape Hybrid (ehv)
Owners Guide, 2nd Printing
USA (fus)