Increasing speed while using speed control, Reducing speed while using speed control, Turning off speed control – FORD 2011 Mustang v.2 User Manual
Page 78: Steering wheel controls (if equipped), Driver controls
Increasing speed while using speed control
To increase the set speed:
• Press and hold SET (+) until you get to the desired speed, then
release. You can also use SET (+) to operate the tap-up function.
Press and release SET (+) to increase the vehicle set speed in 1 mph
(1.6 km/h) increments.
• Use the accelerator pedal to get to the desired speed then press and
release SET (+).
Reducing speed while using speed control
To reduce the set speed:
• Press and hold SET (–) until you get to the desired speed, then
release. You can also use SET (–) to operate the tap-down function.
Press and release SET (–) to decrease the vehicle set speed in 1 mph
(1.6 km/h) increments.
• Press the brake pedal until the desired vehicle speed is reached then
press and release SET (+).
Turning off speed control
To turn off the speed control, press OFF or turn off the ignition.
Note: When you turn off the speed control or the ignition, your speed
control set speed memory is erased.
STEERING WHEEL CONTROLS (IF EQUIPPED)
With navigation system (if
equipped)
• Press
to use the voice
command features.
For further information on using
voice commands with the
navigation system, refer to the
Navigation System supplement.
• Press
to select the entertainment playing media (radio, CD, line in,
etc.).
• Press – VOL + to adjust the volume in any mode.
• Press
to activate phone mode.
Refer to the Navigation System supplement for more information on
using phone features.
Driver Controls
78
2011 05+ Mustang (197)
Owners Guide, 2nd Printing
USA (fus)