beautypg.com

Power steering fluid, Maintenance and specifications – FORD 2011 Fusion v.3 User Manual

Page 321

background image

POWER STEERING FLUID

Refer to scheduled maintenance information.
• 3.5L V6 engine only

1. Start the engine and let it run until it reaches normal operating
temperature (the engine coolant temperature gauge indicator will be
near the center of the normal area between H and C).

2. While the engine idles, turn the steering wheel left and right several
times.

3. Turn the engine off.

4. Check the fluid level in the reservoir. It should be between the
MIN/MAX or upper and lower lines. Do not add fluid if the level is in this
range.

5. If the fluid is low, add fluid in small amounts, continuously checking
the level until it reaches the range between the MIN/MAX or upper and
lower lines. Be sure to put the cap back on the reservoir. Refer to
Maintenance product specifications and capacities in this chapter for
the proper fluid type.

Maintenance and Specifications

321

2011 Fusion (fsn)
Owners Guide, 3rd Printing
USA
(fus)

This manual is related to the following products: