Motorcraft part numbers, Part numbers, Maintenance and specifications – FORD 2012 Shelby GT 500 v.3 User Manual
Page 312
• Move vehicles at least 25 feet (8 m) every 15 days to lubricate
working parts and prevent corrosion.
Removing vehicle from storage
When your vehicle is ready to come out of storage, do the following:
• Wash your vehicle to remove any dirt or grease film build-up on
window surfaces.
• Check windshield wipers for any deterioration.
• Check under the hood for any foreign material that may have collected
during storage (mice/squirrel nests).
• Check the exhaust for any foreign material that may have collected
during storage.
• Check tire pressures and set tire inflation per the Tire Label.
• Check brake pedal operation. Drive the vehicle 15 ft (4.5 meters) back
and forth to remove rust build-up.
• Check fluid levels (including coolant, oil and gas) to make sure there
are no leaks, and fluids are at recommended levels.
• If the battery was removed, clean the battery cable ends and inspect.
Contact your authorized dealer if you have any concerns or issues.
MOTORCRAFT PART NUMBERS
Component
3.7L V6 engine
5.0L V8 engine
Air filter element
FA-1897
FA-1897
Battery
2
BXT-96R-590
BXT-96R-590
Oil filter
FL-500-S
FL-500-S
Spark plugs
1
Cabin air filter
FP53
FP53
Windshield wiper
blade
WW-2201-PF (driver side)
WW-2001-PF (passenger side)
1
For spark plug replacement, see your authorized dealer. Refer to
scheduled maintenance information for the appropriate intervals for
changing the spark plugs.
Replace the spark plugs with ones that meet Ford material and
design specifications for your vehicle, such as Motorcraft
or
equivalent replacement parts. The customer warranty may be void
for any damage to the engine if such spark plugs are not used.
2
For battery replacement of the Mustang Boss 302, use Motorcraft
battery BXT-96R-500.
Maintenance and Specifications
312
2012 05+ Mustang (197)
Owners Guide, 3rd Printing
USA (fus)