FORD 2012 Shelby GT 500 v.1 - Manual (Page 214)

The stability control button can be
used to enable unique
AdvanceTrac
௡ modes.
Full features of the AdvanceTrac
௡
system can be restored by pressing the stability control button again or
by turning off and restarting the engine.
When features of the AdvanceTrac
௡
system are off, the stability control
off light will illuminate steadily.
Pressing the stability control button
again will turn off the stability
control off light.
In R (Reverse), ABS and the engine traction control and brake traction
control features will continue to function; however, ESC is disabled.
AdvanceTrac
௡ Features
Button
functions
Mode
icon
status
ESC TCS
Default at
start-up
—
On during
bulb
check
Enabled Enabled
Button pressed
momentarily Traction
control off
On Enabled Disabled
Button pressed
twice; brakes
applied
Sport mode (if
equipped)
On Enabled Enabled
Button pressed
and held more
than 5 seconds;
brakes applied;
no throttle
AdvanceTrac
௡
Disabled
On Disabled Disabled
Button pressed
again after
deactivation
AdvanceTrac
௡
fully enabled
Off Enabled Enabled
OFF
Driving
214
2012 05+ Mustang (197)
Owners Guide, 1st Printing
USA (fus)