beautypg.com

Lights – FORD 2012 Fusion v.3 User Manual

Page 63

background image

Low beam

6. Disconnect the electrical connector.

To install, reverse the removal procedure.

For passenger side replacement of the high beam bulb, do the
following:

1. Make sure the headlamp control is in the off position, then open the
hood.

2. Reach over the front bolster.

3. Disengage the windshield washer bottle flexible neck strap attachment
and move it to gain access to the bulb.

4. Remove the rubber headlamp bulb access cover.

5. Remove the bulb socket by
rotating it counterclockwise, then
pull it straight out of the lamp
assembly.

Lights

63

2012 Fusion (fsn)
Owners Guide, 3rd Printing
USA
(fus)

This manual is related to the following products: