FORD 2012 Fiesta v.1 - Manual (Page 47)

Pairing a phone for the first time
The first thing you must do to use a phone with the system is to
wirelessly pair your phone with SYNC. Doing so allows your phone to
communicate with the hands-free system, thereby enabling you to make
and receive hands-free calls.
Note: To scroll through the menus, press / .
1. Ensure that the vehicle ignition and radio are turned on and that
you are in P (Park).
2. Press PHONE or . When the display indicates no phone is
paired press OK.
3. When Add Bluetooth Device appears, press OK.
4. When Find SYNC appears in the display, press OK.
5. Put your phone into Bluetooth discovery mode. Refer to your
phone’s user guide if necessary.
6. When prompted on your phone’s display, enter the six digit PIN
provided by SYNC in the radio display.
7. The display will indicate when the pairing is successful.
8. Depending on your phone’s capability and your market, the
system may prompt you with questions such as setting the current
phone as the primary phone (the phone SYNC will automatically try
to connect with first upon vehicle start-up), downloading your
phone book, turning on 911 Assist™ (if available), etc.
Note: SYNC
௡ can support downloading up to approximately 2,000
entries per Bluetooth enabled cellular phone.
Note: If one phone has already been paired to SYNC, the process to pair
another is slightly different. To pair subsequent phones, please refer to
Pairing subsequent phones in the following section.
Entertainment Systems
47
2012 Fiesta (fie)
Owners Guide, 1st Printing
USA (fus)