Locks and security – FORD 2012 F-550 v.1 User Manual
Page 140
Condition
Potential Causes
I accidentally programmed all
keys as MyKeys
• Vehicle has a non Ford-approved
remote start system that is recognized
as an admin key. Refer to the Using
MyKey
with remote start systems
section to reset all MyKeys
as admin
keys.
No MyKey
function with (if
equipped) intelligent access
key with push button start
• An admin intelligent access key is
present at a push-and-start vehicle.
• No MyKeys are programmed to the
vehicle. Refer to Create a MyKey
section.
• Vehicle has been started using a
non Ford-approved remote start
system (as an admin key) then a
MyKey
is inserted without restarting
the engine.
MyKey
programmed total
includes one additional key
• Unknown key has been programmed
to the vehicle as a MyKey
.
• Vehicle is equipped with a non
Ford-approved remote start system.
Refer to Using MyKey
with remote
start systems section.
Admin keys programmed total
includes one additional key
• Unknown key has been programmed
to the vehicle as admin key.
• Vehicle is equipped with a non
Ford-approved remote start system.
Refer to Using MyKey
with remote
start systems section.
MyKey
distance does not
accumulate
• MyKey is not being used by the
intended user.
• MyKey system has been recently
cleared.
• Vehicles has been started using a
non Ford-approved remote start
system (as an admin key) then a
MyKey
is inserted without recycling
the MyKey
in ignition.
Locks and Security
140
2012 F-250/350/450/550 (f23)
Owners Guide, 1st Printing
USA (fus)