beautypg.com

Locks and security – FORD 2012 Escape v.1 User Manual

Page 96

background image

3. Follow steps 1-4 in the Create a MyKey

௡ section.

Note: For all vehicles, the number of MYKEY(S) PROGRAMMED or
ADMIN KEYS PROGRAMMED that is displayed in the MyKey

௡ System

Status menus will include the remote start system as an additional key in
the total count. See the Check MyKey

System Status section.

Note: For all vehicles with remote start installed, it is possible to
program all original vehicle keys as MyKeys

௡, in which case, you will

need to use your remote start system to reset all MyKeys

௡ as admin keys

by doing the following:

1. Enter the vehicle, close all doors.

2. Remote start the vehicle using your remote start fob.

3. Follow Steps 1-4 in the Clear MyKey

௡ section.

Troubleshooting

Condition

Potential Causes

Can’t create a MyKey

• Key in the ignition is already a
MyKey

• Key in the ignition is the last
remaining admin key (there always
has to be at least one admin key)

• SecuriLock௡ Passive Anti-Theft
System is disabled or in unlimited
mode

• Vehicle has been started using a
remote start system that is
programmed as MyKey

௡. Refer to

Using MyKey

with Remote Start

Systems section.

Cannot program the MyKey

optional settings

• Key in the ignition is a MyKey௡

• No MyKeys௡ are programmed to the
vehicle. Refer to Create a MyKey

section

• Vehicle has been started using a
remote start system that is
programmed as MyKey

௡. Refer to

Using MyKey

with Remote Start

Systems section.

Locks and Security

96

2012 Escape (204)
Owners Guide, 1st Printing
USA
(fus)

This manual is related to the following products: