FORD 2014 Fiesta v.3 - Manual (Page 204)

Use oil and fluids that meet the defined
specification and viscosity grades.
Note: If you unable to find an engine oil that
meets the specification defined by
WSS-M2C913-D, you must use an SAE
5W-30 engine oil defined by ACEA A5/B5
for top-up only.
If you use oil and fluids that do not meet
the defined specification and viscosity
grades this may lead to:
•
component damage which may not be
covered by the vehicle Warranty.
• longer engine cranking periods.
• increased emission levels.
• reduced engine performance.
• reduced fuel economy.
TECHNICAL SPECIFICATIONS - 1.6L ECOBOOST™
Capacities
Capacity Item
6.1 qt (5.8 L) Engine cooling system
4.3 qt (4.1 L) Engine lubrication system - including the oil filter
4 qt (3.8 L) Engine lubrication system - excluding the oil filter
0.8 qt (0.75 L) Engine oil top-up - raise the level on the dipstick
from minimum to maximum
12.4 gal (47 L) Fuel tank
1.8 qt (1.7 L) Automatic transmission
2.6 qt (2.5 L) Windshield and rear window washer system -
including headlamp washer
Specifications
Materials
Specification Name
WSS-M2C945-A Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor
Oil or Motorcraft® SAE 5W-20 Full Synthetic Motor Oil
XO-5W20-QSP, XO-5W20-QFS
WSS-M2C200-D2 Motorcraft® Dual Clutch Transmission Fluid
XT-11-QDC
WSD-M2C200-C Motorcraft® Full Synthetic Manual Transmission Fluid
XT-M5-QS
WSS-M97B44-D2 Motorcraft® Orange Antifreeze/Coolant Prediluted
VC-3DIL-B
201
Fiesta (CCT) Vehicles Built From: 11-10-2013, Vehicles Built Up To: 31-12-2013
Maintenance