Seat and mirror memory – BMW X3 3.0i SAV 2004 User Manual
Page 31
29
Adjustments
Height adjustment: pull or press.
To reach the lowest positions, press
button 1.
<
To adjust the front head restraint tilt angle:
adjust by tilting.
Removal – front
1.
Pull the head restraint upward to the
stop
2.
Press button 1 and remove the head
restraint.
Installation – front
1.
Press button 1 and slide the head
restraint into its supports
2.
Adjust the head restraint.
Power seat*
To ensure that the safety systems
continue to provide optimal protec-
tion, please observe the adjustment
instructions on page
<
1
Angle
2
Longitudinal direction
3
Height
4
Backrest angle
Set the head restraint manually, refer to left
column.
Lumbar support*
You can also adjust the contours of the
backrest to obtain additional support in the
lumbar region.
The upper hips and spinal column receive
supplementary support to help you main-
tain a relaxed, upright sitting position.
>
Press the front or rear of the switch:
Increase or decrease curvature
>
Press the upper or lower end of the
switch:
Increase the upper or lower curvature.
Seat and mirror memory*
You can store and select three different
adjustment settings for the driver's seat
and exterior mirrors.
The adjustment of the lumbar support is not
stored in the memory.
Storing
1.
Turn the ignition key to position 1 or 2
2.
Set the desired seat and exterior mirror
position
Online Edition for Part No. 01 41 0 157 631 - © 07/03 BMW AG