beautypg.com

Cruise control – BMW 325iT Sports Wagon 2004 User Manual

Page 77

background image

77

Cruise control*

Starting at about 20 mph / 30 km/h, you
can maintain and store any vehicle
speed that you specify.

The cruise control is operational when-
ever the engine is running and the sys-
tem has been activated.

To activate the system

In ignition key position 2: press the but-
ton in the steering wheel. The indicator
lamp in the instrument cluster comes
on, refer to page

20

. You can now use

the cruise control.

Do not use cruise control on twist-
ing roads, when high traffic den-

sity prevents driving at a constant
speed, or when the road surface is slick
– snow, rain, ice – or loose – rocks or
gravel, sand.

<

To deactivate the system

Press button as often as you need to
until the indicator lamp in the instru-
ment cluster goes out.

Cruise control is also deactivated when
the ignition key is in position 0.

The speed stored in memory is deleted.

To store and maintain speed or to
accelerate

Press button + briefly:

The system stores and maintains the
current vehicle speed. Every time you
tap the button, the speed increases by
approx. 0.6 mph / 1 km/h.

Press and hold button +:

The vehicle accelerates without pres-
sure on the accelerator pedal. When
you release the button, the system
stores and maintains the current speed.

If on a downhill gradient the
engine braking effect is not suffi-

cient, the controlled speed can be
exceeded. Speed can drop on uphill
grades if the engine output is insuffi-
cient.

<

To decelerate

Press button – briefly:

When cruise control is active, every tap
of the button reduces the speed by
approx. 0.6 mph / 1 km/h.

Press and hold button –:

With the cruise control active, the sys-
tem automatically reduces the throttle
opening to slow the vehicle. When you
release the button, the system stores
and maintains the current speed.

To interrupt the cruise control

When the system is activated, press the
button. The indicator lamp stays on.
You can use the cruise control again
whenever you want by calling up the
speed that was stored last.

In addition, cruise control is interrupted
automatically:
> When the brakes are applied

> When you apply pressure to the

clutch pedal, or when you move the
automatic transmission selector lever
from D to N

> If you exceed or fall below the preset

speed for an extended period – by
depressing the accelerator, for exam-
ple.

Overview

Controls

Maintenance

Repairs

Data

Index

Online Edition for Part-No. 01 41 0 157 605 - © 09/03 BMW AG

This manual is related to the following products: