Head restraints, Safety belts – BMW 330i Sedan 2004 User Manual
Page 51
51
Head restraints
To adjust
Height: pull the head restraint up or
push it down.
Press button to retract to the
lowest position – see arrow 1.
<
Adjust the angle of the front head
restraints by tilting them manually.
You can reduce the risk of spinal
injury and whiplash by adjusting
the head restraint to a height at which it
is centered roughly at ear level.
<
Removal – front
1. Pull up the head restraint, continuing
until it is at maximum extension
2. Press button – see arrow 1 – and
remove the head restraint.
Installation – front
Slide the head restraint into the sock-
ets.
Safety belts
Always wear your safety belt
Always fasten your safety belt before
starting off. As supplemental restraint
devices, the airbags are designed to
enhance the effectiveness of the safety
belts, and not to replace them.
To close
Make sure you hear the catch engage in
the belt buckle.
To release
1. Press red button in the belt buckle
2. Hold end of the belt
3. Guide belt back into the inertia reel.
Overview
Controls
Maintenance
Repairs
Data
Index
Online Edition for Part-No. 01 41 0 157 602 - © 09/03 BMW AG