Cargo area – BMW X5 3.0i SAV 2006 User Manual
Page 126
126
n
Cargo area
2. Remove the partition net from the
bag, unroll it half way and hook it into
the retaining strap on both sides,
refer to arrow
Note how the partition net is
stored in the bag and secured
in the vehicle so that you can return
everything to its proper place again
after use.
If your vehicle has a pull-out cargo
floor, follow the instructions on
page
<
53
0d
e
3
50
3. Slide back the covers on the retain-
ers for the partition net on both sides
of the roof, refer to arrow
4. Insert the curved ends of the partition
net rod into the retainers on both
sides
5. Now you can slide the covers toward
the front again, refer to arrow
53
0d
e
2
89
6. Pull the partition net down by the
loop on both sides, refer to arrow,
and hook the hook into the eye on
the backrest
The case with the roll-up cover is
not shown in the illustration. With
the case removed, it is easier to hook
the hooks of the partition net onto the
backrest.
<
53
0d
e
3
51
Online Edition for Part No. 01 41 0 159 867 - © 07/05 BMW AG