BMW X3 3.0i SAV 2006 - Manual (Page 73)

Re
fe
re
n
c
e
A
t a
g
lanc
e
Co
n
tr
o
ls
D
riv
in
g tip
s
M
o
b
ilit
y
71
evasive maneuvers, thus endangering the pas-
sengers.
<
To ensure that the safety belts continue
to provide optimal protection, please fol-
low the instructions on page 26 . <
Ski bag*
To create a flat cargo surface, you can remove
the ski bag and replace it with a tray before
folding the rear backrest forward. The tray is
inserted in the same way as inserting the ski
bag, refer to Inserting ski bag.
70
Cargo area cover
Pull the cargo area cover out by the handle and
hook it into the rear holders.
You can carry light objects such as articles of
clothing on the cargo area cover.
Never place heavy, hard objects on the
cover. If you do so, they could endanger
passengers during braking or evasive maneu-
vers.
Do not allow the cover to snap back into place;
this can damage it.
<
Removal
1. Press the side buttons, refer to arrow 1.
2. Pull the case toward the rear, refer to
arrow
2.
Installation
Push the case forward into the two side holders
until it locks into place.
Stowing* when rear seat back is folded
down
Holders for the case are mounted on the backs
of the rear seat backs, refer to arrows
1.
Guide in the case from the right side until it
locks into place, refer to arrow
2. As you do this,
the cargo area cover must always point in the
direction of travel and the loop of the partition
net must point upward.
You can pull out the partition net and insert it
into the holders in the roof area above.
Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG