Safety belts, Adju stmen ts – BMW M3 Sedan 2008 User Manual

Page 36

Adju

stmen

Safety feature

Close the driver's door and switch the igni-
tion on or off, refer to page

Press the desired memory button

1 or 2

and keep it pressed until the adjustment
process has been completed.

If the

button was pressed accidentally:

Press the button again; the LED goes out.

Call-up with the remote control

The driver's seat position last stored is stored
for the remote control currently in use.
You can select the occasion on which the seat is
reset to that position.

Call-up when the vehicle is unlocked.

Call-up when the driver's door is opened.

When this Personal Profile function is
used, first make sure that the footwell

behind the driver's seat is free of obstacles.
Failure to do so could cause injury to persons or
damage to objects as a result of a rearward
movement of the seat.

The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.

Activating/deactivating automatic call-
up

For operating principle refer to page

Lightly push button

1 in the turn indicator

lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".

Press button

Lightly push button

1 in the turn indicator

lever down repeatedly until the symbol
appears in the display.

Press button

Use button

1 to select:

Call-up when the vehicle is unlocked.

Call-up when the driver's door is
opened.

Switch off automatic function.

Press button

The setting is stored.

Safety belts

Observe the adjustment instructions on
page

to ensure the best possible per-

sonal protection.

Before every drive, make sure that all occupants
wear their safety belts. Airbags complement the
safety belt as an additional safety device, but
they do not represent a substitute.
On the rear seats, the center belt buckle marked
with the letters CENTER is solely intended for
the center passenger.