BMW ActiveHybrid X6 2010 - Manual (Page 23)

Re
fe
re
n
c
e
A
t a
g
lanc
e
Co
n
tr
o
ls
D
riv
in
g tip
s
M
o
b
ilit
y
21
Everything under control
Charge state display
Shows the available charge on a scale from 0 to
1 when drive readiness is switched on. At the
scale value 1, the high-voltage battery is fully
charged. The five segments divide the scale
into ranges of 20
% each.
In normal driving operation, the high-voltage
battery is charged to approx. 80
%. This permits
the hybrid system to make optimal use of the
energy recovery when decelerating or driving
downhill.
Even at the scale value 0, the hybrid system is
still under high voltage.
Displaying operating modes
Energy flows
In all operating modes of the vehicle, the energy
flows can be displayed on the Control Display.
This gives you an overview of the functioning of
the hybrid system in different driving condi-
tions.
Accessing the energy flow display
1. "Vehicle Info"
2. "Hybrid"
3. Energy flows are displayed.
The energy flow display functions according to
the following principle:
> Blue: Electrical energy.
> Red: Energy from the combustion engine.
> Arrow: Direction of the energy flow.
> Segments of the high-voltage battery sym-
bolize the charge state.
> The operating modes are displayed: DRIVE,
eDRIVE, CHARGE, eBOOST
Operating by voice activation*
You can also select the "Hybrid" menu using
voice activation.
{Hybrid}.
The menu is selected.
Online Edition for Part no. 01 41 2 603 632 - © 09/09 BMW AG Online Edition for Part no. 01 41 2 603 632 - © 09/09 BMW AG