BMW 335i Convertible 2010 - Manual (Page 146)

Replacing components
144
3. Push the wire bracket out of the anchor
towards the right and fold it up.
4. Disconnect the plug, change the bulb and
reconnect the plug.
5. Insert the bulb.
6. Fold the wire bracket down and engage it.
7. Reattach the cover.
Turn signals, front
PY21W bulb, 21 watts
1. Release the cover in the wheel well, refer to
Access through the wheel well on
page
143 .
2. Rotate turn signal bulb socket 1 to the left
and remove.
3. Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
4. Insert turn signal bulb socket 1.
5. Reattach the cover in the wheel well.
Tail lamps
Coupe
> Turn signal:
PY21W bulb, 21 watts
> Brake lamp in the trunk lid:
H21W bulb, 21 watts
> Other lamps:
W16W bulb, 16 watts
The tail lamps are divided in two parts. One part
is in the trunk lid, the other is in the fender.
1 Turn signal
2 Roadside parking lamp/tail lamp, LED
3 Backup lamp
4 Brake lamp, consisting of two individual
bulbs
5 Brake Force Display lamp
6 Roadside parking lamp/tail lamp, LED
If one of the bulbs
2, 5 or 6 malfunctions, please
contact your BMW center or a workshop that
works according to BMW repair procedures
with correspondingly trained personnel.
Convertible
> Turn signal:
PY21W bulb, 21 watts
> Brake lamp in the trunk lid:
H21W bulb, 21 watts
The tail lamps are divided in two parts. One part
is in the trunk lid, the other is in the fender.
Online Edition for Part no. 01 41 2 603 012 - © 08/09 BMW AG Online Edition for Part no. 01 41 2 603 012 - © 08/09 BMW AG