BMW 135i Convertible 2010 User Manual
Page 23
21
For operating principle refer to page
.
1.
Switch on the ignition, refer to page
.
2.
Lightly push button
1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
3.
Press button
2.
4.
Lightly push button
1 in the turn indicator
lever down repeatedly until the desired
symbol appears in the display.
>
Confirmation signal during unlocking
>
Confirmation signal during locking
5.
Press button
2.
6.
Use button
1 to select:
>
The hazard warning flashers light up
during unlocking/locking.
>
The function is deactivated.
7.
Press button
2.
The setting is stored.
Malfunctions
The remote control may malfunction due to
local radio waves. If this occurs, unlock and lock
the car at the door lock with the integrated key.
Coupe: in vehicles without an alarm system
*
or
Comfort Access
*
, only the driver's door can be
unlocked and locked using the integrated key in
the door lock.
If the car can no longer be locked with a remote
control, the battery in the remote control is dis-
charged. Use the remote control on an
extended trip to recharge the battery, refer to
page
. The remote control for Comfort
Access contains a battery that may have to be
changed, refer to page
.
For US owners only
The transmitter and receiver units comply with
part 15 of the FCC/Federal Communications
Commission regulations. Operation is gov-
erned by the following:
FCC ID:
LX8766S
LX8766E
LX8CAS
Compliance statement:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
>
This device must not cause harmful inter-
ference, and
>
this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modifications or
changes to these devices could void the
user's authority to operate this equipment.
<
Online Edition for Part no. 01 41 2 602 813 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 813 - © 08/09 BMW AG