Safety belts – BMW 135i Convertible 2011 User Manual
Page 43
41
Call-up with the remote control
The driver's seat position last set is stored for
the remote control currently in use.
You can select whether or not the seat is reset
to that position automatically.
When this Personal Profile function is
used, first make sure that the footwell
behind the driver's seat is free of obstacles.
Failure to do so could cause injury to persons or
damage to objects as a result of a rearward
movement of the seat.
<
The adjusting procedure is halted when you
touch a seat adjustment switch or one of the
memory buttons.
Activating/deactivating automatic call-
up
1.
Briefly press button
1 in the turn signal/high
beam lever up or down repeatedly until the
symbol appears in the display, accompa-
nied by the word "SET".
2.
Press button
2.
3.
Briefly press button
1 in the turn signal/high
beam lever down repeatedly until the sym-
bol appears in the display.
4.
Press button
2.
5.
Use button
1 to select:
>
Call-up when the vehicle is unlocked.
>
Call-up when the driver's door is
opened.
>
Switch off automatic function.
6.
Press button
2.
The setting is stored.
Safety belts
Observe the adjustment instructions on
page
to ensure the best possible per-
sonal protection.
<
Before every drive, make sure that all occupants
wear their safety belts. Airbags complement the
safety belt as an additional safety device, but
they do not represent a substitute.
Closing
Make sure you hear the latch plate engage in
the belt buckle.
The upper belt anchor is suitable for adults of
any stature as long as the seat is adjusted prop-
erly, refer to page
Opening
1.
Grasp the belt firmly.
2.
Press the red button in the buckle.
3.
Guide the belt into its reel.
Online Edition for Part no. 01 41 2 604 079 - © 02/10 BMW AG