BMW 550i xDrive Sedan 2014 User Manual
Page 138
The indicator lamps in the instrument cluster
light up and the mark in the speedometer is set
to the current speed.
Cruise control can be used.
Switching off
Deactivated or interrupted system
If the system is deactivated or inter‐
rupted, actively intervene by braking, steering
and, if necessary, with evasive maneuvers; oth‐
erwise, there is the danger of an accident oc‐
curring.◀
If switching off the system while stationary,
press on the brake pedal at the same time.
Press the button on the steering
wheel.
▷
If active: press twice.
▷
If interrupted: press once.
The displays go out. The stored desired speed
and distance are deleted.
Interrupting
Press the button on the steering
wheel.
If interrupting the system while stationary,
press on the brake pedal at the same time.
The system is automatically interrupted in the
following situations:
▷
When the brakes are applied.
▷
When the clutch pedal is depressed.
▷
When selector lever position D is disen‐
gaged.
▷
When DTC Dynamic Traction Control is
activated or DSC is deactivated.
▷
When DSC is actively controlling stability.
▷
When SPORT+ is activated with Driving
Dynamics Control.
▷
If the safety belt and the driver's door are
opened when the vehicle is standing still.
▷
If the system has not detected objects for
an extended period, e.g., on a road with
very little traffic without road edge line
markings.
▷
If the detection range of the radar is dis‐
rupted, for example, by dirt or heavy fog.
Maintaining/storing the speed
Press the button.
Or:
Press the rocker switch while the system is in‐
terrupted.
When the system is switched on, the current
speed is maintained and stored as the desired
speed.
This is displayed, refer to page
speedometer and briefly in the instrument
cluster.
When cruise control is maintained or stored,
DSC Dynamic Stability Control is switched on,
if necessary.
Changing, maintaining, and storing
the speed
The rocker switch can be pressed while the
system is interrupted to maintain and store the
current speed. DSC Dynamic Stability Control
is switched on, if necessary.
Adapting the desired speed
Adapt the desired speed to the road con‐
ditions and be ready to brake at all times; oth‐
erwise, there is the danger of an accident oc‐
curring.◀
Seite 138
Controls
Driving comfort
138
Online Edition for Part no. 01 40 2 928 000 - II/14