Freedom Designs Freedom SP3 - Manual (Page 30)

Freedom Designs, Inc. SP3
28
Main Frame
continued…..
Latch Style Swing Away Hangers
The
SP3 frames ship standard with swing-away hangers
in 75° or 90°
1. To swing away the hanger, place your hand on the
hanger release lever.
2. Pull back on the lever towards the chair. This will
enable the hanger to swing away for ease of transfer.
3. To remove the hanger, lift the hanger upward until
the pivot saddle is out of it’s receiver on the frame.
4. To attach the hanger, line up the pivot saddle with
it’s receiver on the frame and insert downward.
Swing hanger inward until it locks into place.