EcoPure MW_MW40_7316711C - Manual (Page 5)

5 Miracle Water Installation & Operation Manual
Miscellaneous Service Information
DESIGN SPECIFICATION MW-30 MW-40
FILL CYCLE 1 FLOW .3 gpm .3 gpm
BRINE CYCLE 2 FLOW .22 gpm .22 gpm
BRINE RINSE CYCLE 2 FLOW .15 gpm .15 gpm
BACKWASH CYCLE (MAX.) 2 FLOW 2.0 gpm 2.0 gpm
FAST RINSE CYCLE (MAX.) 2 FLOW 2.0 gpm 2.0 gpm
1 gallon per minute flow to brine tank
2 gallon per minute flow to drain
Salt Storage Capacity
MW-30 - 150 lbs.
MW-40 - 175 lbs.
Product Specifications
MW-30 MW-40
Rated Service Flow Rate (gpm) 8.0 8.0
Amount of High Capacity Ion Exchange Resin (cu. ft.) .82 1.01
Pressure Drop at Rated Service Flow (psig) 12 15
Water Supply Max. Hardness (gpg) 95 110
Water Supply Max. Clear Water Iron (ppm) 5 5
Water Pressure Limits (min./max. psi) 20 - 100 20 - 100
Min. - Max. Water Temperature (°F) 40 - 120 40 - 120
Min. Water Supply Flow Rate (gpm) 3 3
Max. Drain Flow Rate (gpm) 2.0 2.0
Performance Claims
MW-30 MW-40
Rated Softening Capacity (Grains @ 14,700 @ 2.9 15,300 @ 3.0
Pound Salt Dose) 25,400 @ 8.0 32,800 @ 9.6
30,100 @ 13.1 39,100 @ 16.1
Rated Efficiency (Grains/Pound of Salt
5060 @ 2.9 lbs. 5100 @ 3.0 lbs.
@ Minimum Salt Dose)
These systems conform to NSF/ANSI 44 for the specific performance claims as verified
and substantiated by test data.
The efficiency rating is only valid at the minimum stated salt dose. This softener is effi-
ciency rated according to NSF/ANSI Standard 44