Dogtra YS100 - Manual (Page 5)

18
1) Turn on the “Anti-bark collar” by turning the
intensity dial clockwise and set it on level seven.
2) Test by scratching the rough surface of the collar (as
shown in the diagram) using a fingernail or pen.
When the light comes on, wait for two seconds, then
repeat the same process once more.
TESTING THE ANTI-BARK COLLAR
19
SELECTING ON-OFF & INTENSITY
LEVELS
Level 1 is lowest and 7 is the highest.
By turning the on/off dial clockwise with your
thumbnail, stimulation intensity increases and by
turning counter-clockwise, it decreases.
The dial on the collar is used to turn the “Anti-bark
collar” on and off and for selecting the intensity level.
To turn off the “Anti-bark collar”, position as shown
above.
( )
Decrease
(+)
Increase