Dogtra 180NCP User Manual

Page 12

CHARGING THE BATTERIES

Battery Charging Procedure

1. Attach the charging cables to both the

transmitter and receiver(s), as shown on
page 19.

2. Plug the charger into a 120-volt wall outlet

or, if using the accessory field charger,
plug into a cigarette lighter. (Use a 230-
volt European charger for Europe.) When
properly plugged in, all indicator lights
should glow red.

The receiver automatically turns off when
you insert the charging cable into the
battery-charging receptacle on the receiver.

3. After charging, cover the battery charging

receptacles with the rubber plugs on the
transmitter and receiver.

4. The battery is fully charged with a 14-hour

charge. The lights will stay red during the
charging process. They DO NOT turn
green when fully charged. Charging the
batteries for more than 14 hours at one time
will not extend battery life.

CHARGING THE BATTERIES

2. Do not charge the batteries near any

flammable substances.

3. Fully charge the batteries for 14 hours if

the unit is to be stored without use for a
period of a month or more.

4. Recharge the unit if:

- the indicator light on the collar is emitting

a red color

- the indicator light on the transmitter or

receiver will not come on

- the indicator light on the transmitter or

receiver comes on momentarily, but will
not stay on when the “Constant” button is
pushed.