Dogtra 3500 Series - Manual (Page 10)

16
DESCRIPTION OF TRANSMITTER PARTS
The transmitter for the
single dog unit has four buttons (one on the
face of the transmitter, two on the left side and
one on the right side).
BUTTON FUNCTION
Nick
Pager
ON/OFF
Switch
Constant
(1-dog)
“Nick” Button
The “Nick” button is located on the top left.
It is imprinted with the letter “N” for an easy,
clear selection. When the “Nick” button is
pushed the receiver emits a single, rapid pulse of
electrical stimulation.
17
DESCRIPTION OF TRANSMITTER PARTS
“Constant” Button
The “Constant” button is located on the
bottom left. Pressing the “Constant” button gives
continuous stimulation as long as the button is
pushed, for up to 12 seconds. If the button is not
released after 12 seconds, the stimulation will
automatically turn off as a safety feature. The
collar will be ready to be reactivated once the
button has been released.
“Pager” Button
The pager button is located on the face of the
transmitter. Pressing it will give non-stimulating
vibration as long as the button is depressed, for
up to 12 seconds.
Transmitter Power ON/OFF
The button on the right side of the transmitter
is the “ON/OFF” button that activates the
transmitter and LCD screen only.
To turn the transmitter on, press the
“ON/OFF” button on the right side until the
LCD screen illuminates.
To turn the transmitter off, press the
“ON/OFF” button on the right side of the
transmitter. When the LCD screen displays
“OFF” release the button.