Dogtra 2000 Series User Manual

Page 14

CHARGING THE BATTERIES

Battery charging procedure

1. Attach the charging cables to both the

transmitter and receiver(s), as shown on page 25.

2. Plug the charger into a 110-volt wall outlet as

if using the accessory field charger plug into a
cigarette lighter.
(Use 220-volt European charger for Europe)
When properly plugged in, all indicator lights
should glow red.

The receiver automatically turns off when you
insert the charging cable into the battery
charging receptacle on the receiver.

3. After charging, cover the battery charging

receptacles with the rubber plugs on the
transmitter and receiver.

4. Battery is fully charged with a 14-hour charge.

CHARGING THE BATTERIES

3. Fully charge the batteries for 14 hours if the

collar is to be stored without use for a period of
a month or more.

4. Recharge the battery if

- the indicator light on the collar is emitting a

double blink every 2 seconds,

- the indicator light on the transmitter or

receiver will not come on,

- the indicator light on the transmitter or

receiver comes on momentarily but will not
stay on when the “Constant” button is pushed.