Bissell 1292 - Manual (Page 7)

7
clearing clogs from the dirt cup
1. Unplug the vacuum from electrical outlet.
2. Remove the dirt cup from the vacuum,
following steps 1-3 of emptying the dirt cup
on page 6.
3. Remove the dirt cup filter assembly from
the dirt cup, following step 2 of Clean the
dirt cup filter on page 6.
4. Tap the dirt cup filter assembly over a
garbage container to remove any dirt or
debris from the cyclone screen that sur-
rounds the dirt cup filter.
5. Reach up into the dirt cup to clear any dirt
or debris from the dirt cup.
6. Check to see if there are any clogs
in the suction inlet.
7. After clearing any dirt or debris from
the dirt cup, replace the dirt cup filter
assembly back in the dirt cup following step
8 of Cleaning the dirt cup filter on page 6.
Replacement Parts
These items are available for purchase as accessories for your BISSELL vacuum:
To purchase visit www.BISSELL.com.
pArT # pArT nAme pArT # pArT nAme
160-2835 Cyclone Screen 160-2834 Dirt Cup Filter and Foam Filter
160-2833 Post-Motor Filter 160-2838 Multi-Surface Floor Nozzle
160-3057 Hose with Handle 203-2832 Extension Wands (2)
160-3058 Crevice Tool 160-3063 TurboBrush™ Tool
160-2839 Turbine Floor Tool 160-2840 Hard Floor Tool
160-3062 Metal Base Multi-Surface
Floor Nozzle 160-3060 Dusting Brush
160-3059 Upholstery Tool 160-3061 Tool Holster