Bissell 26Y1 - Manual (Page 8)

w w w . b i s s e l l . c o m
O
perations
8
Special tools
Your BISSELL CleanView Multi
Cyclonic is not only a powerful
carpet and rug vacuum cleaner,
it’s also a versatile bare floor and
above floor vacuum cleaner when
you select one of the special tools.
1. Floor nozzle:
Use to vacuum carpets, rugs and bare
floors. Swivel head turns to get into tight
spaces and fits under cabinets.
A. To vacuum carpets and rugs, push
the brush switch to the carpet
position . This will pull the
brushes up into the floor nozzle.
B. To vacuum bare floors, push the
brush switch to the bare floor
position . This will extend the
brushes down from the floor nozzle.
2. Upholstery tool: Use the upholstery
tool to clean curtains, draperies, cush-
ions and fabrics.
3. Crevice tool: Use the crevice tool in
tight, narrow spaces.
4. Dusting brush: Use the dusting brush
to dust furniture, blinds, books, lamps,
shelves and baseboards.
5. Pet tool adapter:(select models only)
The pet tool adapter must be attached to
the handle end of the flex hose to use the
wide TurboBrush Pet. The narrow end of
the adapter attaches to the handle end
of the flex hose and the wide end of the
adapter attaches to the Wide TurboBrush
Pet. The adapter should fit snug to the hose
and pet tool without using excessive force
6. Wide TurboBrush Pet: (select models
only) Use rotating brush action for small,
flat areas such as cushions and beds.
NOTE: Press down gently and
pull toward you in a raking
motion. Too mush pressure will
cause the brush to stop rotating.
1A.
1B.
2.
3.
4.
5.
6.
Brush Down
Brush Up
NOTICE:
These tools are designed
to remove pet hair from
upholstery or carpeted
surfaces. They should not
be used on pets.