Notice, Warning, Aintenance and care – Bissell 12R7E User Manual

Page 8

w w w . b i s s e l l . c o m

aintenance and care

8. Insert the dirt cup filter assembly back into

the dirt cup by lining up the tabs on the

top of the dirt cup filter assembly with the

notches inside the top of the dirt cup and

turning the handle on the bottom of the

dirt cup filter assembly clockwise to lock
into place.

cleaning the pre-motor filter

the pre-motor filter protects the

motor from dirt and dust particles.

use only bissell replacement filters

in your cleanView compact.

1. Remove the dirt cup from the vacuum,

following steps 1-3 of emptying the dirt

cup on page 6.

2. The pre-motor filter is located between

the power button and the automatic cord

rewind button.

3. The pre-motor filter can be hand washed

in cold water with a mild detergent. Rinse

well and air dry thoroughly before placing

back into the vacuum.

Replacing the post-motor filter

the post-motor filter assists in

the filtration process to return

cleaner air to the room. use only

bissell replacement filters in your

cleanView compact.

1. Unplug the vacuum from electrical outlet.
2. Remove the filter door (located on the back

of the vacuum) by pushing down on the tab

and pulling out and away from the vacuum.

3. The post-motor filter can be hand washed

in cold water with a mild detergent. Rinse

well and air dry thoroughly before placing

back into the vacuum.

4. Replace the filter door by placing the tabs

on the bottom of the filter door into the

notches on the bottom of the post-motor filter

compartment and pushing the tab forward

back into the vacuum to lock into place.

cleaning the dirt cup filters continued

Washable

Pre-Motor

Filter

notice:

This product is intended for household use

only and not for commercial or industrial

use. Vacuuming of dust from products like

plaster, concrete or ashes will damage the

motor and void the warranty.

Tip:

For maximum cleaning performance,

check the filters often and clean or

replace if necessary.

WaRning:

Do not operate cleaner with damp

or wet filters or without all filters in

place.