Perations – Bissell 10Z3E User Manual
Page 5
w w w. b i s s e l l . c o m
A
ssembly
5
no tools are required for assembly;
simply insert foot into body of unit until
you hear a click.
charging
before charging, make sure unit is
in the off position.
1.
Insert the charging adapter plug into the
charging port on the back of the unit.
2.
Plug the adapter into the wall outlet. The red
indicator light will illuminate and remain on
when plugged into wall outlet. Charge the
unit completely for 24 hours prior to first use.
note: the adapter may become warm
during charging – this is normal.
3.
When the unit is fully discharged, approxi-
mately 16 hours of charging is required
for the battery to regain full capacity.
Power switch
the power switch is located on the top
of the handle. settings include:
(o) = off
(i) = suction on
(bRusH) = suction and brush on
using your stick vacuum
1.
Push power switch on to desired setting.
2.
Easily clean hard floors, low pile carpet,
and area rugs.
3.
When finished cleaning, turn power
switch to oFF (o) position.
2-way folding handle
for cleaning under couches, beds and
other hard to reach areas.
1.
To release, push button located under
power switch to bend handle forward
for cleaning under furniture.
2.
For space saving storage, push button
to bend handle backward.
1.
1.
2-Way Folding
Handle Release
O
perations