Bissell 2080 - Manual (Page 5)

5
This user’s guide has been designed to help you
get the most satisfaction from your BISSEll
lightweight deep cleaner. you’ll find assembly
and operating instructions, safety precautions,
as well as maintenance and troubleshooting
instructions. Please read this user’s guide
thoroughly before assembling your deep
cleaner.
Pay particular attention to the product diagram,
assembly instructions, and part names. locate
and organize all parts before assembly. familiarize
yourself with the parts and where they go.
following this user’s guide will greatly enhance
your ability to get the most performance from your
BISSEll deep cleaner for many years.
your deep cleaner assembles quickly and
easily. The only tool you will need to assemble
your deep cleaner is a Phillips Head
screwdriver.
your deep cleaner is packaged with the following
items:
Handle assembly
Upper body
lower body with collection tank
Clean water/solution tank
3 Screws
1. Slide upper body into lower body.
2. Secure with screws.
3. Slide strain reliever handle down into upper
body until it will go no further.
4. Secure with screw.
5. Place clean water/solution tank on back of unit.
Other components
Clean water/solution tank - holds approximately 2
litres of hand hot tap water and cleaning solution.
Collection tank - holds approximately 2 litres of
dirty water.
Power cord - for storage, wrap power cord
around upper and lower cord wraps. Secure plug
to cord with molded clip.
H
ow to put it together
A
ssembly
w w w . b i s s e l l . c o m
1
2
3
4
5