Bissell 70C8 - Manual (Page 10)

w w w . b i s s e l l . c o m
O
perations
10
Fill the 2-in-1 water tank
1. Remove the tank from the base of the
machine by lifting the tank carry handle.
2. Carry like a bucket to the sink. Rotate the
handle forward to unlatch the lid. Remove
lid, turn over and locate built in measuring
cup.
3. Fill with BISSELL 2X formula to the indicat-
ed fill line on the built in measuring cup
and pour into mouth of the bladder.
4. Fill the bladder with clean hand hot tap
water.
*Do not boil or microwave water
as it can destroy the bladder.
5. Replace the top of the tank by matching
the lid and tank edges. Handle must be in
the forward position in order to replace
lid. Rotate the handle to the carrying
position to latch the lid.
Note: Remember to secure the lid
and test to make sure it is secure
before picking up the tank.
6. Place tank into machine base, seating firmly
in place. Rotate tank handle back into
latched position.
WARNING:
To reduce the risk of fire and
electric shock due to internal
component damage, use
only BISSELL cleaning
formulas intended for use
with the deep cleaner.
Non-BISSELL cleaning
formulas may harm the
machine and void the
warranty.
1.
3.
5.
2.
4.
6.