Humboldt H-4156M CBR-Specific Load Frame - Manual (Page 4)

General Information
Inspection
Your CBR equipment was thoroughly inspected before it was shipped and
should be ready to operate as soon as you have completed the set-up
procedure.
Notify Humboldt Mfg. Co. or your local agent and file a claim with any carriers
involved if you find any damage to the machine. Unpack all of the equipment
carefully to prevent loss of small items or manuals.
Physical Specification
Shipping weight: 185 lbs. (78.9 kg)
Overall height: 39"
Base dimension: 16" x 18" x 10"
Power Supply
110 VAC 60 Hz 1 phase (H-4156M), 375 watts
220 VAC 50/60 Hz 1 phase (H-4156M.4F), 375 watts
Check to make sure your machine has the correct voltage for your local supply.
Power Cord
The H-4156M machine is fitted with a molded vinyl-grounding plug, while the
H-4156M.4F is supplied without a plug allowing you to fit it with the correct
plug for your application.
The cord is made of three conductors:
(American color-coding)
(International color coding)
Green Ground (Earth) Green/Yellow Ground (Earth)
White Cold (Neutral) Blue Cold (Neutral)
Black Hot (Live) Brown Hot (Live)
Fuses
The CBR Test Machine uses a slow-blow fuse that is fitted into the left side of
the machine. The replacement part number is H-1339.13.
Initial Installation
Remove the packing list and verify that all parts have been received. Normally
you will receive one crate comprised of compression frame and a calibrated
load ring (H-4454.100) 10,000lbf capacity, and accessories for CBR penetration.
Set the machine base up at the place it is to be used in the laboratory and
then check that it is level by placing a spirit level on the platen. If it is not level,
adjust the feet of the machine.