beautypg.com

Humboldt H-4150 Motorized Sample Ejector User Manual

Page 3

background image

Operation
Place and attach the proper size ejection disc for the mold or tube onto the jack piston
rod and insert the matching ejection ring into the top casting using the key notches to
retain it by twisting approximately 30 degrees.
Place the mold with sample into the disk and raise the jack to bring the mold into
engagement with the top ring. Continue applying force by operating the jack handle
to push the sample from the mold.

Maintenance
Inspect the oil fill hole and maintain oil level to the bottom of the screw hole with jack in
the upright position. Use hydraulic jack oil available in local auto supply stores.