beautypg.com

Humboldt – Humboldt HC-2937 Crack Monitor Plus User Manual

Page 4

background image

www.humboldtmfg.com

HUMBOLDT

Testing Equipment for

Construction Materials

Humboldt Mfg. Co.
875 Tollgate Road

Elgin, Illinois 60123 U.S.A.

U.S.A. Toll Free: 1.800.544.7220

Voice: 1.708.456.6300

Fax: 1.708.456.0137

Email: [email protected]

Fixing Instructions
1. Fix the Crack Monitor over the crack with the vertical zero line on the

calibration scale parallel with the crack to be monitored.

2. Ensure that the monitoring spigots on the HC-2937 are pointed down are on

the right side of the crack.

3. Use screws and adhesive to fix
4. Remove the four pre-set pegs
5. If the crack opens or closes the cursor moves relative to the calibration scale.

The opening or closing of the crack can then be recorded on the record sheet
on the reverse of these instructions.

6. Using Digital or Vernier Calipers enables measurements to ± 0.1mm to be

recorded. Locate the Caliper jaws against the projecting monitoring spigots
(figure 2). Measure the distance.