Warning – Humboldt H-1394 Deluxe Water Baths User Manual
Page 4
Figure #1
Once the spin bar and stirrer plate are in position, carefully place the shelf into
the unit without disrupting the placement of the spin bar.
Slowly fill the bath with water. The water level should be approximately 1" from
the top when specimens are placed in the bath.
Every Humboldt Deluxe Water Bath is calibrated to a certified thermometer to
ensure accurate temperatures during operation. In most cases you should not
need to recalibrate you water bath. However, if you need to access the controller
for calibration purposes, please contact Humboldt for step-by-step directions.
WARNING
DO NOT RUN UNIT DRY.
UNIT SHOULD NEVER BE USED WITH LESS THAN 2 INCHES OF WATER.
IF UNIT IS EMPTIED WHEN HOT, IMMEDIATELY REFILL WITH A MINIMUM
OF 2 INCHES OF WATER
NEVER USE FLAMMABLE LIQUIDS IN BATH
Figure #1