Humboldt H-2713A Specific Gravity Bench Set - Manual (Page 4)

General Information
Inspection
Your Specific Gravity Bench Kit was thoroughly inspected before it was shipped
and should be ready to operate as soon as you have completed the set-up
procedure.
Notify Humboldt Mfg. Co. or your local agent and file a claim with any carriers
involved if you find any damage to the machine. Unpack all of the equipment
carefully to prevent loss of small items or manuals.
Physical Specification
Shipping weight: 185 lbs. (78.9 kg)
Overall Dimensions: 16”x18”x10”
Required Power Supply
120 VAC 60 Hz 1 phase, 3 amps
Initial Installation
Remove the packing list and verify that all parts have been received. Normally
you will receive one crate containing the bench and all it's components packed
together. To install remove all the packing from the bench and accessories.
Place the bench in the location it will be used.
To aid in shipping, the crank arm is installed in a reversed position. Before use,
remove the bolt attaching the crank arm and handle (not the bolt holding the
handle to the crank arm) to the unit and reverse it so that the handle is pointing
out and reinstall. This allows the crank arm to be rotated without hitting the
bench top.
This is the bolt,
which should
be used to turn
the handle and
crank arm into the
correct operating
orientation.