beautypg.com

Humboldt H-4386SM Soil Box User Manual

Page 6

background image

NOTE:
1 When using multi-meters be sure readings on both meters are obtained

simultaneously.

2. Potential must be in volts, current must be in amperes to obtain result in

ohm-cm.

3. Multiplication factor for the H-4386 soil box is 1.
4. When used with the H-4385A Soil Resistance Meter, no calculations are

necessary because the multiplication factor is 1 ohm-cm. Therefore, the

resistivity value of the sample can be read directly off the meter dial.

Refer to the instruction sheet included with each meter for additional

information.

This manual is related to the following products: