Panasonic 6.0 plus - Manual (Page 33)

Operation
Document Version 2008-01 33
*1 You cannot send a call waiting tone when
– the called party has not set the Call Waiting feature.
– the called party has set the Data Line Security feature.
*2 Enter the desired value in the “%” positions. You must enter the correct number of characters as
represented by the “%” using 0 to 9 or .
To change the default messages and create your personal messages (Message no. 9), refer to
the documentation for your PBX.
*3 If you do not set an extension PIN, you cannot lock and unlock your extension.
*4 You can register a flexible CO key to the clear message waiting indications feature (for one-touch
operation).
• For more information, refer to the user documentation for your PBX.
Message Waiting
Caller
To leave a message waiting indication
When the called extension is busy or does not answer
OR
To cancel a message waiting indication
Desired Extension No.
Called extension
To call back
OR
To clear message waiting indications left on your extension
*4
Your Extension No.
To register
(“
PBX Program
”) (F-CO Key)
Your Extension No.
To clear message waiting indications (one-touch operation)
(One-touch dialing key)