Motorola minitor v - Manual (Page 5)

4
BATTERY INSTALLATION
NOTE: For optimum performance, the Ni-MH battery pack
must be fully charged before operating your alert monitor.
Install your batteries as follows:
1. Release the battery lock, and slide the battery pack latch
towards the right to unlock the battery pack.
2. Press the clip.
3. Slide out on the battery pack as shown below.
4. Slide in the battery pack into place, and then slide the
battery pack latch to the locked position.
CAUTION: If the batteries are improperly installed, the alert
monitor will not function and the batteries will not charge.