Calyx 500 - Mono Block Power Amplifier - Manual (Page 9)

Calyx 500 Hi-Fi Audio Amplifier
Digital & Analog Co., Ltd. (Rev. 1.0) -9-
5. Trouble-Shooting
Problem Check
There is no power
► Ensure the AC power cord is connected securely.
► Ensure the plug is fully inserted into the wall socket and is switched on.
There is no sound
► Check that your source unit is properly connected.
► Check that your speakers are properly connected.
► Check that the volume level of the source unit is set to minimum.
► Make sure your source unit is not in mute mode.
► Check interconnects.
There is a loud buzz or
hum ► Ensure no interconnects are loose or defective.
There is weak bass or
diffused stereo imaging ► Ensure that speakers are not wired out of phase.
※ For more frequently asked questions (FAQ’s), technical advice and information on getting the most out of your
Calyx 500, please visit the Support section on Calyx Amp’s website: www.calyxamp.com
6. Specifications
◎ Function
● One-channel high quality audio power
● Class-D power amplifier with analog audio input
● High audio performance based with Class-D Architecture
◎ Application
● A/V receivers
● Home Theater systems
● High-end stereo and multi-channel amplifiers
◎ Features
- 10W @ 0.005% THD+N, 1kHz, 4Ω
- THD+N < 0.1%, 0.1W – 500W, 4Ω
- Input Sensitivity 1.1V @ 500W, 4Ω
- Input Impedance : XLR=47k Ω, RCA=57k Ω
- SNR 110dB @ Balanced Input , 1kHz, 4Ω
- Bandwidth limit = 80 kHz (8Ω)
- Total efficiency 81 % @ 100W, 8Ω
- Selectable mains 110~120Vac / 220~240Vac (The voltage is fixed when factory out.)
◎ Dimension
- Net Dimension : 224mm X 295mm X 66mm (Width X Depth X Height)
- Net Weight
: 4.37kg